How to Start With Bitcoin at No Cost Featured Bitcoin News

Dragonchain Great Reddit Scaling Bake-Off Public Proposal

Dragonchain Great Reddit Scaling Bake-Off Public Proposal

Dragonchain Public Proposal TL;DR:

Dragonchain has demonstrated twice Reddit’s entire total daily volume (votes, comments, and posts per Reddit 2019 Year in Review) in a 24-hour demo on an operational network. Every single transaction on Dragonchain is decentralized immediately through 5 levels of Dragon Net, and then secured with combined proof on Bitcoin, Ethereum, Ethereum Classic, and Binance Chain, via Interchain. At the time, in January 2020, the entire cost of the demo was approximately $25K on a single system (transaction fees locked at $0.0001/txn). With current fees (lowest fee $0.0000025/txn), this would cost as little as $625.
Watch Joe walk through the entire proposal and answer questions on YouTube.
This proposal is also available on the Dragonchain blog.

Hello Reddit and Ethereum community!

I’m Joe Roets, Founder & CEO of Dragonchain. When the team and I first heard about The Great Reddit Scaling Bake-Off we were intrigued. We believe we have the solutions Reddit seeks for its community points system and we have them at scale.
For your consideration, we have submitted our proposal below. The team at Dragonchain and I welcome and look forward to your technical questions, philosophical feedback, and fair criticism, to build a scaling solution for Reddit that will empower its users. Because our architecture is unlike other blockchain platforms out there today, we expect to receive many questions while people try to grasp our project. I will answer all questions here in this thread on Reddit, and I've answered some questions in the stream on YouTube.
We have seen good discussions so far in the competition. We hope that Reddit’s scaling solution will emerge from The Great Reddit Scaling Bake-Off and that Reddit will have great success with the implementation.

Executive summary

Dragonchain is a robust open source hybrid blockchain platform that has proven to withstand the passing of time since our inception in 2014. We have continued to evolve to harness the scalability of private nodes, yet take full advantage of the security of public decentralized networks, like Ethereum. We have a live, operational, and fully functional Interchain network integrating Bitcoin, Ethereum, Ethereum Classic, and ~700 independent Dragonchain nodes. Every transaction is secured to Ethereum, Bitcoin, and Ethereum Classic. Transactions are immediately usable on chain, and the first decentralization is seen within 20 seconds on Dragon Net. Security increases further to public networks ETH, BTC, and ETC within 10 minutes to 2 hours. Smart contracts can be written in any executable language, offering full freedom to existing developers. We invite any developer to watch the demo, play with our SDK’s, review open source code, and to help us move forward. Dragonchain specializes in scalable loyalty & rewards solutions and has built a decentralized social network on chain, with very affordable transaction costs. This experience can be combined with the insights Reddit and the Ethereum community have gained in the past couple of months to roll out the solution at a rapid pace.

Response and PoC

In The Great Reddit Scaling Bake-Off post, Reddit has asked for a series of demonstrations, requirements, and other considerations. In this section, we will attempt to answer all of these requests.

Live Demo

A live proof of concept showing hundreds of thousands of transactions
On Jan 7, 2020, Dragonchain hosted a 24-hour live demonstration during which a quarter of a billion (250 million+) transactions executed fully on an operational network. Every single transaction on Dragonchain is decentralized immediately through 5 levels of Dragon Net, and then secured with combined proof on Bitcoin, Ethereum, Ethereum Classic, and Binance Chain, via Interchain. This means that every single transaction is secured by, and traceable to these networks. An attack on this system would require a simultaneous attack on all of the Interchained networks.
24 hours in 4 minutes (YouTube):
24 hours in 4 minutes
The demonstration was of a single business system, and any user is able to scale this further, by running multiple systems simultaneously. Our goals for the event were to demonstrate a consistent capacity greater than that of Visa over an extended time period.
Tooling to reproduce our demo is available here:
https://github.com/dragonchain/spirit-bomb

Source Code

Source code (for on & off-chain components as well tooling used for the PoC). The source code does not have to be shared publicly, but if Reddit decides to use a particular solution it will need to be shared with Reddit at some point.

Scaling

How it works & scales

Architectural Scaling

Dragonchain’s architecture attacks the scalability issue from multiple angles. Dragonchain is a hybrid blockchain platform, wherein every transaction is protected on a business node to the requirements of that business or purpose. A business node may be held completely private or may be exposed or replicated to any level of exposure desired.
Every node has its own blockchain and is independently scalable. Dragonchain established Context Based Verification as its consensus model. Every transaction is immediately usable on a trust basis, and in time is provable to an increasing level of decentralized consensus. A transaction will have a level of decentralization to independently owned and deployed Dragonchain nodes (~700 nodes) within seconds, and full decentralization to BTC and ETH within minutes or hours. Level 5 nodes (Interchain nodes) function to secure all transactions to public or otherwise external chains such as Bitcoin and Ethereum. These nodes scale the system by aggregating multiple blocks into a single Interchain transaction on a cadence. This timing is configurable based upon average fees for each respective chain. For detailed information about Dragonchain’s architecture, and Context Based Verification, please refer to the Dragonchain Architecture Document.

Economic Scaling

An interesting feature of Dragonchain’s network consensus is its economics and scarcity model. Since Dragon Net nodes (L2-L4) are independent staking nodes, deployment to cloud platforms would allow any of these nodes to scale to take on a large percentage of the verification work. This is great for scalability, but not good for the economy, because there is no scarcity, and pricing would develop a downward spiral and result in fewer verification nodes. For this reason, Dragonchain uses TIME as scarcity.
TIME is calculated as the number of Dragons held, multiplied by the number of days held. TIME influences the user’s access to features within the Dragonchain ecosystem. It takes into account both the Dragon balance and length of time each Dragon is held. TIME is staked by users against every verification node and dictates how much of the transaction fees are awarded to each participating node for every block.
TIME also dictates the transaction fee itself for the business node. TIME is staked against a business node to set a deterministic transaction fee level (see transaction fee table below in Cost section). This is very interesting in a discussion about scaling because it guarantees independence for business implementation. No matter how much traffic appears on the entire network, a business is guaranteed to not see an increased transaction fee rate.

Scaled Deployment

Dragonchain uses Docker and Kubernetes to allow the use of best practices traditional system scaling. Dragonchain offers managed nodes with an easy to use web based console interface. The user may also deploy a Dragonchain node within their own datacenter or favorite cloud platform. Users have deployed Dragonchain nodes on-prem on Amazon AWS, Google Cloud, MS Azure, and other hosting platforms around the world. Any executable code, anything you can write, can be written into a smart contract. This flexibility is what allows us to say that developers with no blockchain experience can use any code language to access the benefits of blockchain. Customers have used NodeJS, Python, Java, and even BASH shell script to write smart contracts on Dragonchain.
With Docker containers, we achieve better separation of concerns, faster deployment, higher reliability, and lower response times.
We chose Kubernetes for its self-healing features, ability to run multiple services on one server, and its large and thriving development community. It is resilient, scalable, and automated. OpenFaaS allows us to package smart contracts as Docker images for easy deployment.
Contract deployment time is now bounded only by the size of the Docker image being deployed but remains fast even for reasonably large images. We also take advantage of Docker’s flexibility and its ability to support any language that can run on x86 architecture. Any image, public or private, can be run as a smart contract using Dragonchain.

Flexibility in Scaling

Dragonchain’s architecture considers interoperability and integration as key features. From inception, we had a goal to increase adoption via integration with real business use cases and traditional systems.
We envision the ability for Reddit, in the future, to be able to integrate alternate content storage platforms or other financial services along with the token.
  • LBRY - To allow users to deploy content natively to LBRY
  • MakerDAO to allow users to lend small amounts backed by their Reddit community points.
  • STORJ/SIA to allow decentralized on chain storage of portions of content. These integrations or any other are relatively easy to integrate on Dragonchain with an Interchain implementation.

Cost

Cost estimates (on-chain and off-chain) For the purpose of this proposal, we assume that all transactions are on chain (posts, replies, and votes).
On the Dragonchain network, transaction costs are deterministic/predictable. By staking TIME on the business node (as described above) Reddit can reduce transaction costs to as low as $0.0000025 per transaction.
Dragonchain Fees Table

Getting Started

How to run it
Building on Dragonchain is simple and requires no blockchain experience. Spin up a business node (L1) in our managed environment (AWS), run it in your own cloud environment, or on-prem in your own datacenter. Clear documentation will walk you through the steps of spinning up your first Dragonchain Level 1 Business node.
Getting started is easy...
  1. Download Dragonchain’s dctl
  2. Input three commands into a terminal
  3. Build an image
  4. Run it
More information can be found in our Get started documents.

Architecture
Dragonchain is an open source hybrid platform. Through Dragon Net, each chain combines the power of a public blockchain (like Ethereum) with the privacy of a private blockchain.
Dragonchain organizes its network into five separate levels. A Level 1, or business node, is a totally private blockchain only accessible through the use of public/private keypairs. All business logic, including smart contracts, can be executed on this node directly and added to the chain.
After creating a block, the Level 1 business node broadcasts a version stripped of sensitive private data to Dragon Net. Three Level 2 Validating nodes validate the transaction based on guidelines determined from the business. A Level 3 Diversity node checks that the level 2 nodes are from a diverse array of locations. A Level 4 Notary node, hosted by a KYC partner, then signs the validation record received from the Level 3 node. The transaction hash is ledgered to the Level 5 public chain to take advantage of the hash power of massive public networks.
Dragon Net can be thought of as a “blockchain of blockchains”, where every level is a complete private blockchain. Because an L1 can send to multiple nodes on a single level, proof of existence is distributed among many places in the network. Eventually, proof of existence reaches level 5 and is published on a public network.

API Documentation

APIs (on chain & off)

SDK Source

Nobody’s Perfect

Known issues or tradeoffs
  • Dragonchain is open source and even though the platform is easy enough for developers to code in any language they are comfortable with, we do not have so large a developer community as Ethereum. We would like to see the Ethereum developer community (and any other communities) become familiar with our SDK’s, our solutions, and our platform, to unlock the full potential of our Ethereum Interchain. Long ago we decided to prioritize both Bitcoin and Ethereum Interchains. We envision an ecosystem that encompasses different projects to give developers the ability to take full advantage of all the opportunities blockchain offers to create decentralized solutions not only for Reddit but for all of our current platforms and systems. We believe that together we will take the adoption of blockchain further. We currently have additional Interchain with Ethereum Classic. We look forward to Interchain with other blockchains in the future. We invite all blockchains projects who believe in decentralization and security to Interchain with Dragonchain.
  • While we only have 700 nodes compared to 8,000 Ethereum and 10,000 Bitcoin nodes. We harness those 18,000 nodes to scale to extremely high levels of security. See Dragonchain metrics.
  • Some may consider the centralization of Dragonchain’s business nodes as an issue at first glance, however, the model is by design to protect business data. We do not consider this a drawback as these nodes can make any, none, or all data public. Depending upon the implementation, every subreddit could have control of its own business node, for potential business and enterprise offerings, bringing new alternative revenue streams to Reddit.

Costs and resources

Summary of cost & resource information for both on-chain & off-chain components used in the PoC, as well as cost & resource estimates for further scaling. If your PoC is not on mainnet, make note of any mainnet caveats (such as congestion issues).
Every transaction on the PoC system had a transaction fee of $0.0001 (one-hundredth of a cent USD). At 256MM transactions, the demo cost $25,600. With current operational fees, the same demonstration would cost $640 USD.
For the demonstration, to achieve throughput to mimic a worldwide payments network, we modeled several clients in AWS and 4-5 business nodes to handle the traffic. The business nodes were tuned to handle higher throughput by adjusting memory and machine footprint on AWS. This flexibility is valuable to implementing a system such as envisioned by Reddit. Given that Reddit’s daily traffic (posts, replies, and votes) is less than half that of our demo, we would expect that the entire Reddit system could be handled on 2-5 business nodes using right-sized containers on AWS or similar environments.
Verification was accomplished on the operational Dragon Net network with over 700 independently owned verification nodes running around the world at no cost to the business other than paid transaction fees.

Requirements

Scaling

This PoC should scale to the numbers below with minimal costs (both on & off-chain). There should also be a clear path to supporting hundreds of millions of users.
Over a 5 day period, your scaling PoC should be able to handle:
*100,000 point claims (minting & distributing points) *25,000 subscriptions *75,000 one-off points burning *100,000 transfers
During Dragonchain’s 24 hour demo, the above required numbers were reached within the first few minutes.
Reddit’s total activity is 9000% more than Ethereum’s total transaction level. Even if you do not include votes, it is still 700% more than Ethereum’s current volume. Dragonchain has demonstrated that it can handle 250 million transactions a day, and it’s architecture allows for multiple systems to work at that level simultaneously. In our PoC, we demonstrate double the full capacity of Reddit, and every transaction was proven all the way to Bitcoin and Ethereum.
Reddit Scaling on Ethereum

Decentralization

Solutions should not depend on any single third-party provider. We prefer solutions that do not depend on specific entities such as Reddit or another provider, and solutions with no single point of control or failure in off-chain components but recognize there are numerous trade-offs to consider
Dragonchain’s architecture calls for a hybrid approach. Private business nodes hold the sensitive data while the validation and verification of transactions for the business are decentralized within seconds and secured to public blockchains within 10 minutes to 2 hours. Nodes could potentially be controlled by owners of individual subreddits for more organic decentralization.
  • Billing is currently centralized - there is a path to federation and decentralization of a scaled billing solution.
  • Operational multi-cloud
  • Operational on-premises capabilities
  • Operational deployment to any datacenter
  • Over 700 independent Community Verification Nodes with proof of ownership
  • Operational Interchain (Interoperable to Bitcoin, Ethereum, and Ethereum Classic, open to more)

Usability Scaling solutions should have a simple end user experience.

Users shouldn't have to maintain any extra state/proofs, regularly monitor activity, keep track of extra keys, or sign anything other than their normal transactions
Dragonchain and its customers have demonstrated extraordinary usability as a feature in many applications, where users do not need to know that the system is backed by a live blockchain. Lyceum is one of these examples, where the progress of academy courses is being tracked, and successful completion of courses is rewarded with certificates on chain. Our @Save_The_Tweet bot is popular on Twitter. When used with one of the following hashtags - #please, #blockchain, #ThankYou, or #eternalize the tweet is saved through Eternal to multiple blockchains. A proof report is available for future reference. Other examples in use are DEN, our decentralized social media platform, and our console, where users can track their node rewards, view their TIME, and operate a business node.
Examples:

Transactions complete in a reasonable amount of time (seconds or minutes, not hours or days)
All transactions are immediately usable on chain by the system. A transaction begins the path to decentralization at the conclusion of a 5-second block when it gets distributed across 5 separate community run nodes. Full decentralization occurs within 10 minutes to 2 hours depending on which interchain (Bitcoin, Ethereum, or Ethereum Classic) the transaction hits first. Within approximately 2 hours, the combined hash power of all interchained blockchains secures the transaction.

Free to use for end users (no gas fees, or fixed/minimal fees that Reddit can pay on their behalf)
With transaction pricing as low as $0.0000025 per transaction, it may be considered reasonable for Reddit to cover transaction fees for users.
All of Reddit's Transactions on Blockchain (month)
Community points can be earned by users and distributed directly to their Reddit account in batch (as per Reddit minting plan), and allow users to withdraw rewards to their Ethereum wallet whenever they wish. Withdrawal fees can be paid by either user or Reddit. This model has been operating inside the Dragonchain system since 2018, and many security and financial compliance features can be optionally added. We feel that this capability greatly enhances user experience because it is seamless to a regular user without cryptocurrency experience, yet flexible to a tech savvy user. With regard to currency or token transactions, these would occur on the Reddit network, verified to BTC and ETH. These transactions would incur the $0.0000025 transaction fee. To estimate this fee we use the monthly active Reddit users statista with a 60% adoption rate and an estimated 10 transactions per month average resulting in an approximate $720 cost across the system. Reddit could feasibly incur all associated internal network charges (mining/minting, transfer, burn) as these are very low and controllable fees.
Reddit Internal Token Transaction Fees

Reddit Ethereum Token Transaction Fees
When we consider further the Ethereum fees that might be incurred, we have a few choices for a solution.
  1. Offload all Ethereum transaction fees (user withdrawals) to interested users as they wish to withdraw tokens for external use or sale.
  2. Cover Ethereum transaction fees by aggregating them on a timed schedule. Users would request withdrawal (from Reddit or individual subreddits), and they would be transacted on the Ethereum network every hour (or some other schedule).
  3. In a combination of the above, customers could cover aggregated fees.
  4. Integrate with alternate Ethereum roll up solutions or other proposals to aggregate minting and distribution transactions onto Ethereum.

Bonus Points

Users should be able to view their balances & transactions via a blockchain explorer-style interface
From interfaces for users who have no knowledge of blockchain technology to users who are well versed in blockchain terms such as those present in a typical block explorer, a system powered by Dragonchain has flexibility on how to provide balances and transaction data to users. Transactions can be made viewable in an Eternal Proof Report, which displays raw data along with TIME staking information and traceability all the way to Bitcoin, Ethereum, and every other Interchained network. The report shows fields such as transaction ID, timestamp, block ID, multiple verifications, and Interchain proof. See example here.
Node payouts within the Dragonchain console are listed in chronological order and can be further seen in either Dragons or USD. See example here.
In our social media platform, Dragon Den, users can see, in real-time, their NRG and MTR balances. See example here.
A new influencer app powered by Dragonchain, Raiinmaker, breaks down data into a user friendly interface that shows coin portfolio, redeemed rewards, and social scores per campaign. See example here.

Exiting is fast & simple
Withdrawing funds on Dragonchain’s console requires three clicks, however, withdrawal scenarios with more enhanced security features per Reddit’s discretion are obtainable.

Interoperability Compatibility with third party apps (wallets/contracts/etc) is necessary.
Proven interoperability at scale that surpasses the required specifications. Our entire platform consists of interoperable blockchains connected to each other and traditional systems. APIs are well documented. Third party permissions are possible with a simple smart contract without the end user being aware. No need to learn any specialized proprietary language. Any code base (not subsets) is usable within a Docker container. Interoperable with any blockchain or traditional APIs. We’ve witnessed relatively complex systems built by engineers with no blockchain or cryptocurrency experience. We’ve also demonstrated the creation of smart contracts within minutes built with BASH shell and Node.js. Please see our source code and API documentation.

Scaling solutions should be extensible and allow third parties to build on top of it Open source and extensible
APIs should be well documented and stable

Documentation should be clear and complete
For full documentation, explore our docs, SDK’s, Github repo’s, architecture documents, original Disney documentation, and other links or resources provided in this proposal.

Third-party permissionless integrations should be possible & straightforward Smart contracts are Docker based, can be written in any language, use full language (not subsets), and can therefore be integrated with any system including traditional system APIs. Simple is better. Learning an uncommon or proprietary language should not be necessary.
Advanced knowledge of mathematics, cryptography, or L2 scaling should not be required. Compatibility with common utilities & toolchains is expected.
Dragonchain business nodes and smart contracts leverage Docker to allow the use of literally any language or executable code. No proprietary language is necessary. We’ve witnessed relatively complex systems built by engineers with no blockchain or cryptocurrency experience. We’ve also demonstrated the creation of smart contracts within minutes built with BASH shell and Node.js.

Bonus

Bonus Points: Show us how it works. Do you have an idea for a cool new use case for Community Points? Build it!

TIME

Community points could be awarded to Reddit users based upon TIME too, whereas the longer someone is part of a subreddit, the more community points someone naturally gained, even if not actively commenting or sharing new posts. A daily login could be required for these community points to be credited. This grants awards to readers too and incentivizes readers to create an account on Reddit if they browse the website often. This concept could also be leveraged to provide some level of reputation based upon duration and consistency of contribution to a community subreddit.

Dragon Den

Dragonchain has already built a social media platform that harnesses community involvement. Dragon Den is a decentralized community built on the Dragonchain blockchain platform. Dragon Den is Dragonchain’s answer to fake news, trolling, and censorship. It incentivizes the creation and evaluation of quality content within communities. It could be described as being a shareholder of a subreddit or Reddit in its entirety. The more your subreddit is thriving, the more rewarding it will be. Den is currently in a public beta and in active development, though the real token economy is not live yet. There are different tokens for various purposes. Two tokens are Lair Ownership Rights (LOR) and Lair Ownership Tokens (LOT). LOT is a non-fungible token for ownership of a specific Lair. LOT will only be created and converted from LOR.
Energy (NRG) and Matter (MTR) work jointly. Your MTR determines how much NRG you receive in a 24-hour period. Providing quality content, or evaluating content will earn MTR.

Security. Users have full ownership & control of their points.
All community points awarded based upon any type of activity or gift, are secured and provable to all Interchain networks (currently BTC, ETH, ETC). Users are free to spend and withdraw their points as they please, depending on the features Reddit wants to bring into production.

Balances and transactions cannot be forged, manipulated, or blocked by Reddit or anyone else
Users can withdraw their balance to their ERC20 wallet, directly through Reddit. Reddit can cover the fees on their behalf, or the user covers this with a portion of their balance.

Users should own their points and be able to get on-chain ERC20 tokens without permission from anyone else
Through our console users can withdraw their ERC20 rewards. This can be achieved on Reddit too. Here is a walkthrough of our console, though this does not show the quick withdrawal functionality, a user can withdraw at any time. https://www.youtube.com/watch?v=aNlTMxnfVHw

Points should be recoverable to on-chain ERC20 tokens even if all third-parties involved go offline
If necessary, signed transactions from the Reddit system (e.g. Reddit + Subreddit) can be sent to the Ethereum smart contract for minting.

A public, third-party review attesting to the soundness of the design should be available
To our knowledge, at least two large corporations, including a top 3 accounting firm, have conducted positive reviews. These reviews have never been made public, as Dragonchain did not pay or contract for these studies to be released.

Bonus points
Public, third-party implementation review available or in progress
See above

Compatibility with HSMs & hardware wallets
For the purpose of this proposal, all tokenization would be on the Ethereum network using standard token contracts and as such, would be able to leverage all hardware wallet and Ethereum ecosystem services.

Other Considerations

Minting/distributing tokens is not performed by Reddit directly
This operation can be automated by smart contract on Ethereum. Subreddits can if desired have a role to play.

One off point burning, as well as recurring, non-interactive point burning (for subreddit memberships) should be possible and scalable
This is possible and scalable with interaction between Dragonchain Reddit system and Ethereum token contract(s).

Fully open-source solutions are strongly preferred
Dragonchain is fully open source (see section on Disney release after conclusion).

Conclusion

Whether it is today, or in the future, we would like to work together to bring secure flexibility to the highest standards. It is our hope to be considered by Ethereum, Reddit, and other integrative solutions so we may further discuss the possibilities of implementation. In our public demonstration, 256 million transactions were handled in our operational network on chain in 24 hours, for the low cost of $25K, which if run today would cost $625. Dragonchain’s interoperable foundation provides the atmosphere necessary to implement a frictionless community points system. Thank you for your consideration of our proposal. We look forward to working with the community to make something great!

Disney Releases Blockchain Platform as Open Source

The team at Disney created the Disney Private Blockchain Platform. The system was a hybrid interoperable blockchain platform for ledgering and smart contract development geared toward solving problems with blockchain adoption and usability. All objective evaluation would consider the team’s output a success. We released a list of use cases that we explored in some capacity at Disney, and our input on blockchain standardization as part of our participation in the W3C Blockchain Community Group.
https://lists.w3.org/Archives/Public/public-blockchain/2016May/0052.html

Open Source

In 2016, Roets proposed to release the platform as open source to spread the technology outside of Disney, as others within the W3C group were interested in the solutions that had been created inside of Disney.
Following a long process, step by step, the team met requirements for release. Among the requirements, the team had to:
  • Obtain VP support and approval for the release
  • Verify ownership of the software to be released
  • Verify that no proprietary content would be released
  • Convince the organization that there was a value to the open source community
  • Convince the organization that there was a value to Disney
  • Offer the plan for ongoing maintenance of the project outside of Disney
  • Itemize competing projects
  • Verify no conflict of interest
  • Preferred license
  • Change the project name to not use the name Disney, any Disney character, or any other associated IP - proposed Dragonchain - approved
  • Obtain legal approval
  • Approval from corporate, parks, and other business units
  • Approval from multiple Disney patent groups Copyright holder defined by Disney (Disney Connected and Advanced Technologies)
  • Trademark searches conducted for the selected name Dragonchain
  • Obtain IT security approval
  • Manual review of OSS components conducted
  • OWASP Dependency and Vulnerability Check Conducted
  • Obtain technical (software) approval
  • Offer management, process, and financial plans for the maintenance of the project.
  • Meet list of items to be addressed before release
  • Remove all Disney project references and scripts
  • Create a public distribution list for email communications
  • Remove Roets’ direct and internal contact information
  • Create public Slack channel and move from Disney slack channels
  • Create proper labels for issue tracking
  • Rename internal private Github repository
  • Add informative description to Github page
  • Expand README.md with more specific information
  • Add information beyond current “Blockchains are Magic”
  • Add getting started sections and info on cloning/forking the project
  • Add installation details
  • Add uninstall process
  • Add unit, functional, and integration test information
  • Detail how to contribute and get involved
  • Describe the git workflow that the project will use
  • Move to public, non-Disney git repository (Github or Bitbucket)
  • Obtain Disney Open Source Committee approval for release
On top of meeting the above criteria, as part of the process, the maintainer of the project had to receive the codebase on their own personal email and create accounts for maintenance (e.g. Github) with non-Disney accounts. Given the fact that the project spanned multiple business units, Roets was individually responsible for its ongoing maintenance. Because of this, he proposed in the open source application to create a non-profit organization to hold the IP and maintain the project. This was approved by Disney.
The Disney Open Source Committee approved the application known as OSSRELEASE-10, and the code was released on October 2, 2016. Disney decided to not issue a press release.
Original OSSRELASE-10 document

Dragonchain Foundation

The Dragonchain Foundation was created on January 17, 2017. https://den.social/l/Dragonchain/24130078352e485d96d2125082151cf0/dragonchain-and-disney/
submitted by j0j0r0 to ethereum [link] [comments]

July 2020 Updates

July 2020 Updates

https://preview.redd.it/nnobdcikzre51.jpg?width=1280&format=pjpg&auto=webp&s=96de266298b85ee64ba151eb7658abb335477349
The month of July has been very busy but productive for the Swipe team. With the recent partnerships, announcements, and launches that were revealed, Swipe has indeed trying its best to achieve its mission of mainstreaming cryptocurrencies worldwide.
Swipe & Binance Seal Partnership
Swipe and Binance users got the exciting news that they have been waiting as the two companies simultaneously announced on July 7, its partnership through an acquisition move of Binance.
Binance, one of the world’s largest digital asset exchange, completed its acquisition of Swipe for an undisclosed amount. The acquisition aims to further mainstream the adoption of cryptocurrencies by bridging the gap between fiat and digital assets.
In line with this partnership, Swipe has also announced the integration of Binance Coin ($BNB) and Binance USD ($BUSD) on the Swipe Wallet application. Swipe users can now buy and sell crypto with their linked debit or credit cards, spend it to fiat via Swipe Visa Card and swap it instantly with other coins available on the app.
Also, Swipe’s native token $SXP is now listed on Binance Korea and Binance, with SXP/USDT perpetual contract with up to 50x leverage for all professional traders on the Binance platform.
Swipe Wallet v 1.5 Update
Swipe’s recent application update now lets users of choose from eight different languages such as English, Spanish, Italian, French, Portuguese, Chinese, Korean, and Japanese to use on their app. This will help users who are native speakers of these languages to transact within the app more effectively.
Download the updated app today: http://sw.pe/App
Swipe Card Rewards
Swipe Visa Card users will now have the choice to get up to 4% cashback in either Bitcoin ($BTC), Swipe Token ($SXP), or Binance Coin ($BNB) on every purchase at over 60 million merchants worldwide that accepts Visa.
European and the United Kingdom users can order their Swipe Visa cards their cards here: https://www.swipe.io/cards/
Swipe Slate Card Update
Swipe users who are interested to upgrade their current Swipe Saffron Cards to Swipe Slate cards can now do so with a lowered $SXP six-month stake requirement of 30,000 SXP!
This lowers the cost of entry for our black card by 10x from the initial 300,000 $SXP staking requirement.
Swipe x FTX
Swipe’s native token $SXP is now listed on FTX exchange. Users can now trade futures, spots, and leverage markets on FTX’s website. As $SXP markets are now live on FTX, both companies launched two events on the FTX platform to encourage users to start trading $SXP.
The first event, Buy/Deposit SXP and Split a 40,000 USD Prize Pool, was held from July 17 to 31. $20,000 prize was divided to users who net buy more than 100 SXP, and also another $20,000 to those who net deposit more than $100 or 100 SXP of accepted collateral into the FTX during the event.
The second event, which is the SXP Tokens Trading Competition, has a total prize of 15,000 USD. Participants who will trade more than $200 worth of SXP products will split the prize pool of a maximum of 10,000 USD. The event is still ongoing and will run until August 17. More details are available on https://ftx.com/competitions/swipe
SXP is now listed on Poloniex
$SXP is now listed on cryptocurrency exchange Poloniex. SXP wallets are now open at Poloniex, and users can now begin depositing SXP and trading SXP/BTC, SXP/TRX, and SXP/USDT.
Swipe and Poloniex also both gave away 1,500 worth of $SXP to the first 100 depositors of 200 $SXP at Poloniex.com. Prizes will be deposited within two weeks of the trading competition, which ended last July 24.
Swipe and Elrond Partnership
Swipe recently integrated Elrond Network’s $ERD on its platform. This will make the $ERD token directly available for onboarding to more than 500,000 new users.
$ERD will be spendable via Swipe Wallet and its Visa debit cards, at millions of locations worldwide where Visa is accepted and as well as through services such as Google Pay, Apple Pay & Samsung Pay.
In relation to this newly sealed partnership, it announced a promotional event that lets Swipe users get up to 5% $ERD cashback in ERD on net buys. The event which happened for five days, from July 27 to August 1, gave away up to $100 cashback in ERD per KYC user who help 1 to 1000 $SXP during the event period.
Swipe x Compound
Compound’s governance token $COMP is now integrated on the Swipe Wallet platform. Users can now begin to now buy and sell $COMP with their linked debit or credit cards, spend it to fiat via Swipe Visa Card, and swap it instantly with other coins available on the app.
Swipe Partners with Travala.com
Travala.com, a leading blockchain-based travel booking service, has sealed a notable partnership with Swipe by adding $AVA to the Swipe platform. In addition to its integration on the platform, which will help $AVA users to convert, spend and buy it easily using the mobile application, Swipe Token ($SXP) is now added on Travala.com’s list of preferred payment option at over 2 million hotels and accommodations around the world.
Share your Swipe Visa Card and Win!
Swipe will select 3 lucky participants who will win 500 SXP by simply sharing a photo or video of your actual Swipe Card in action on Facebook, Twitter, Instagram, Reddit, or LinkedIn.
Users must tag their posts with the #GotSwipe hashtag, follow @SwipeWallet on Twitter, or @Swipe on Instagram, Facebook, and LinkedIn.
Three lucky winners in each platform will be selected by the team!
Swipe Launches Staking and DeFi
Swipe is proud to announce that it has launched its test network for Swipe Network Staking with up to 12% APY staking rewards and its plans to launch a Decentralized Finance Lending or Earn application on Binance Smart Chain with Swipe Governance.
With the launch of the Swipe Network testnet, users can use the Swipe Faucet to grab testnet-SXP to use on the decentralized finance application. Users will be able to bond SXP to the Swipe Network smart contract as collateral to ensure the guarantee of conversions for these exchanges.
Meanwhile, Swipe plans to launch a DeFi App on Binance Chain called SwipeFi, which will enable Binance Chain tokens to be used to earn interest on their supply of collateral to the protocol and borrow against their collateral directly on the Binance blockchain. Swipe has been working with the core developers of Binance Smart Chain through the acquisition and partnerships between Swipe and Binance, to launch SwipeFi.
SwipeFi will initially support BTC, BNB, ETH, BUSD, TUSD, and SXP to supply or borrow. The protocol will be governed by a new Binance Chain BEP2 token: Swipe Governance Token (SGV).
Click the LINK to get further information about the Network Staking and DeFi.
40 More Winners on Twitter Giveaway
Forty more winners, who will simply follow Swipe and its Chief Executive Officer Joselito Lizarondo on Twitter, like the contest tweet, and retweet and tag three friends, will get a chance to win $100 BTC each. Ten winners will be announced every week on Swipe’s Twitter page.
---
Stay up-to-date with all the latest news from Swipe
Website: https://swipe.io
Twitter: https://twitter.com/SwipeWallet
Facebook: https://facebook.com/Swipe
Instagram: https://instagram.com/Swipe
Medium: https://medium.com/Swipe
Telegram: https://t.me/SwipeWallet & https://t.me/Swipe
LinkedIn: https://www.linkedin.com/company/swipewallet
YouTube: https://youtube.com/SwipeWallet
submitted by SwipeWallet to Swipe_io [link] [comments]

Day 4: I will repost this guide daily until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and transaction fees are low. ARE YOU PART OF THE SOLUTION? News: Unconfirmed TX's @ 174K, more exchanges adding SegWit, Core prioritizes SegWit GUI

NOTE Just a daily repost because original OP Bastiat seems to be offline (due to holidays I guess). However, this is quite important as I see much misinformation on which exchanges use segwit or not. Please upvote for awareness.
BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make it happen. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin
IMPORTANT NOTE: The mempool is currently overflowing. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
There are 2 different Segwit address formats.
  • p2sh - starting with a "3..."
  • bech32 - starting "bc1..."
Not many wallets/exchanges support bech32 yet and will claim the address is invalid if you try to send to it. bech32 ("native Segwit") is a mildly better solution compared to p2sh.
Exchange Batching Status Segwit (p2sh) Send to bech32
Binance Yes No No
Bitfinex Yes No No
Bitonic ? No No
Bitstamp Yes Yes No
Bittrex Yes ? ?
Coinbase/GDAX No No No
Gemini No No No
HitBTC Yes Yes ?
Huboi ? ? ?
Kraken No Yes ?
LocalBitcoins No ? ?
OKEx ? ? ?
Poloniex ? Yes ?
QuadrigaCX Yes Yes ?
Shapeshift Yes No No
Source 1
Source 2
WALLETS
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Transaction if the sending address is a SegWit address.
    Source
So what address can I send to safely, there is so much confusion?
  • As of right now...
Non-Segwit Transactions
non-Segwit address to…
non-Segwit address OK
3..... (Segwit) OK
bc1.... (Segwit) No (no support for them yet)
Segwit Transactions
3... address (Segwit) to…
non-Segwit address OK
3..... (Segwit) OK
bc1.... (Segwit) No (no support for them yet)
bc1... address (Segwit) to…
non-Segwit address OK
3..... (Segwit) OK
bc1.... (Segwit) OK
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by psycongoroo to Bitcoin [link] [comments]

Day 5: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and transaction fees are low. User demand from this community can help lead to some big changes. Have you joined the /r/Bitcoin SegWit effort?

SUMMARY
Segregrated Witness (SegWit) was activated on the Bitcoin network August 24, 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work. If users demand SegWit now it will temporarily releive the transaction backlog while bigger solutions like Lightning are developed.
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready ?
Bitonic Ready ? Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Ready Yes
LocalBitcoins Ready ?
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Source 1
Source 2
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
Edit: Bitonic batching status updated to 'Yes'
submitted by Bastiat to Bitcoin [link] [comments]

Day 9: I will post this guide regularly until available solutions like SegWit, order batching, and Lightning payment channels are mass adopted, the mempool is empty once again, and tx fees are low. Have you done your part?

BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that this is an important data point that indicates if just a few major exchanges would deploy SegWit the high fees bitcoin is experiencing would be eliminated.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download the latest version of Electrum to generate a SegWit address.
A transaction between two SegWit addresses is a SegWit transaction.
A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
Using Electrum, the "Tools" menu option: "Pay to many".
Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
Draw your own conclusions based on their own words:
March 2016 - Coinbase CEO Brian Armstrong has reservations about Core
Dec 2017 - Coinbase is STILL working on Segwit
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to exist wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
P2SH starts with "3..."
bech32 starts with "bc1..."
Which addresses can I send from/to?
P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backward compatibility
bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Day 3: I will repost this guide daily until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and transaction fees are low. ARE YOU PART OF THE SOLUTION? News: Unconfirmed TX's @ 274K, more exchanges adding SegWit, Core prioritizes SegWit GUI

BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make it happen. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin
IMPORTANT NOTE: The mempool is currently overflowing. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
Exchange Segwit Status Batching Status
Binance ? NOT READY Yes
Bitfinex Ready ?
Bitonic Ready ?
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Ready Deployed Yes
Huboi ? ?
Kraken Ready Yes
LocalBitcoins Ready ?
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Source 1(https://web.archive.org/web/20171212214514/https://bitcoincore.org/en/SegWit_adoption/)
Source 2
WALLETS
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
Edit: Updated Segwit Exchange Status for Binance and HitBTC
submitted by Bastiat to Bitcoin [link] [comments]

Day 8: I will post this guide regularly until available solutions like SegWit, order batching, and Lightning payment channels are mass adopted, the mempool is empty once again, and tx fees are low. BTC Core SegWit GUI coming May 1, Coinbase incompetence exposed, more exchanges deploy SegWit

BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that the high fees bitcoin is experiencing could be easily addressed and need not exist.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download the latest version of Electrum to generate a SegWit address.
A transaction between two SegWit addresses is a SegWit transaction.
A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
Using Electrum, the "Tools" menu option: "Pay to many".
Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
Draw your own conclusions based on their own words:
March 2016 - Coinbase CEO Brian Armstrong has reservations about Core
Dec 2017 - Coinbase is STILL working on Segwit
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to exist wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
P2SH starts with "3..."
bech32 starts with "bc1..."
Which addresses can I send from/to?
P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backward compatibility
bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Day 7: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Do you want low tx fees, because this is how you get low tx fees

TL/DR
Bitcoin users can help lower transaction fees and improve bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to existing wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
    Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
    Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
  • P2SH starts with "3..."
    bech32 starts with "bc1..."
Which addresses can I send from/to?
  • P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backwards compatibility
    bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
    Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
  • The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

TomoChain - Binance AMA Recap - In case you missed it!

TomoChain - Binance AMA Recap - In case you missed it!
TomoChain’s AMA with Binance was recently held on Oct. 19th, 2019 with CEO Long Vuong sharing all the latest updates about TomoChain’s products and potential future projects.

https://preview.redd.it/yz3h0tqgc2u31.jpg?width=1600&format=pjpg&auto=webp&s=1a888e829057030e17ea4cb67828afb2455c6811
*** Below is a brief recap of what happened during the AMA ***
Segment 1: Richie from Binance asked Long Vuong 5 questions.
Richie: Among different blockchains and cryptocurrency projects, what are some key features that set TomoChain aside? What does TomoChain have that other projects don’t?
Long: Some key features which set TomooChain aside include:
  • PoSV consensus: TomoChain uses an innovative consensus method called POSv (Proof of Stake Voting) which gives an incentive to all TomoChain token-holders to play an active part in staking across a network of 150 high-quality masternodes, and to monitor their performance and governance actively. Our staking-governance Dapp, TomoMaster, is recognized as one of the leading staking platforms in the industry. With our PoSV consensus protocol, TomoChain provides:
/ At least 2k TPS while still enhancing security through Double Validation.
/ 2-second block-time and transaction confirmed within almost 4-second.
/ Significantly improvement of user experiences and adoption of blockchain.
  • Double Validation and Randomization: Strengthens Tomochain’s security, reduces fork and nothing-at-stake attacks, and makes TomoChain unique among other Proof-of-Stake-based blockchains.
  • EVM compatible: Every Ethereum smart contract can be effectively run with almost instant transaction confirmation. Porting time:
/ From Ethereum to TomoChain.
/ 2From Tron to TomoChain: 8h.
  • Rich set of our own products: that enable a variety of platforms for end-users to interact seamlessly with blockchain technology, including TomoWallet, TomoMaster, TomoScan, TomoZ, TomoX.
/ TomoZ — Zero Friction Protocol — the first on-chain protocol that offers the ability for any user to pay transaction fees with the same token the user is holding.
/ TomoX — a secure and efficient relayer-masternode decentralized cryptocurrency exchange protocol that empowers a diverse system of relayers, MM providers, and independent projects to work together.
  • Privacy: Lastly, token privacy on TomoChain will be forth-coming in 2020, and the details for implementation will be revealed in due course.
Richie: Since mainnet’s launch 10 months ago, what are some key achievements for TomoChain? And does TomoChain has any plans to keep up with this productivity in the future?
Long: Since our mainnet launch, TomoChain has continuously built our ecosystem strong and stable, resulting in:
  • Being a stable chain running that can handle 2000 tx/s.
  • 50% TOMO staked in the smart-contract for the masternode governance system.
  • 16 active dapps build on top of TomoChain and almost 6000 monthly active users, with a variety of new games and dapps being created.
  • TomoZ’s mainnet launch, a protocol that allows users to pay transaction fees with their own native token without having to hold TOMO, as well as to help users create their own token in 2 minutes. After the launch, a number of token with TRC21 standards has been made through TomoIssuer.
Richie: Which area does TomoChain focus on at the moment? (DeFi, Dapps,..) and which products/projects are you developing to support it?
Long: TomoChain aims to build a safe and credible DeFi system that everyone can benefit from globally, with our recent launch of TomoZ — fees by any token protocol, our decentralized exchange protocol TomoX coming in a couple of weeks, and many more projects in plan for the future.
TomoChain opens up a wide playground for developers to creatively build their own dapps and games. We have an enthusiastic high-tech team that can support you with problems you may have while creating your product. TomoChain’s most recent Dappathon Competition just ended, with 9 final contestants who’ve brought a whole new gaming experience for our community. Thus, many new games are coming up on our platform, encouraging even more developers and game lovers to join. So keep an eye out to try out some of our new games!
Richie: TomoChain has launched TomoZ’s mainnet in August. Can you elaborate on the product and comment on the amount of interest with individuals/businesses you’re seeing in this product?
Long: TomoZ — Zero Friction Protocol — provides inroads to mainstream users who find crypto to be unnecessarily complex. It is the first on-chain protocol that offers the ability for any user to pay transaction fees with the same token that the user is holding.
TomoZ removes the friction of having to hold native blockchain coins/tokens to send to other wallets or to interact with dapps. Users/customers of all businesses using our solution will have a smooth experience without even knowing that they are using the blockchain and cryptocurrency technology.
Tokens issued with the TomoZ protocol follow a new standard called TRC-21 (TRC is the abbreviation of TomoChain Request for Comments). Everyone can create a TRC-21 token on TomoChain in a few clicks using TomoIssuer — a user-friendly token issuance dashboard. No need to spend thousands of USD hiring blockchain developers.
For DeFi apps, TomoZ can be tailored for issuing stablecoins. Digital wallets and payment systems can be set up via TomoZ protocol very fast and cost-effectively.
Richie: The testnet of your flagship product — TomoX — the DEX protocol is to be rolled out soon. What sets TomoX apart from other DEX protocols?
Long: TomoX Testnet is to be launched in a couple of weeks. TomoX Protocol is our relayer-masternode decentralized cryptocurrency exchange protocol. Compared to the current state of the art DEX architecture, TomoX Protocol has quite a lot of advantages, which have been described in detail in our paper (http://bit.ly/33EgSl7), the most notable are as follows:
  1. Performance: TomoX Protocol is integrated into the core TomoChain blockchain consensus layer, which can potentially handle many thousands of transactions per second. Furthermore, with the Relayer-Masternode architecture, the heavy computational load of the matching engine in masternodes can be substantially moved to Relayers’ local matching engine. Performance of the TomoX Protocol can therefore potentially be an improvement when compared to most of the existing DEXs.
  2. Liquidity: This is a chicken and egg problem. Traders do not join most of the existing DEXs because there are not enough orders on these DEXs to match. With the Relayer-Masternode architecture, each relayer can focus on understanding their relevant markets and trading pairs — thus the potential for better and targeted marketing strategies to attract more traders to participate in the ecosystem.
  3. Full decentralization: Most of the existing DEXs are semi-decentralized. TomoX Protocol, on the other hand, is fully decentralized because the order book database, matching engine and trade execution mechanism is decentralized to all masternodes. This decentralization power in TomoX can significantly reduce front-running risks that currently appear in some centralized exchanges or semi-decentralized exchanges.
  4. Security: Centralized exchanges can have significant security issues as they centrally manage a large of amount of assets, and traders on centralized exchanges do not have control of their private keys. TomoX and non-custodial exchanges solve this problem because the users have complete control of their assets. In practice, some DEXs require traders to deposit their assets, while TomoX does not impose this requirement, and is completely non-custodial regarding user assets.
  5. Cost: TomoChain provides near-zero transaction fees, which significantly reduces trading fees compared to most existing DEXs.
SEGMENT 2 — Long asks questions to the chat. Each question is linked with a google form, which will be accepting answers in 3 minutes.
Q1: When was TomoChain listed on Binance?
August 24th, 2019.
Q2: Which TOMO trading pairs are available on Binance.com?
TOMO/BNB, TOMO/BTC, TOMO/USDT and TOMO/USDC.
Q3: What is the name of TomoChain’s consensus?
PoSV — Proof of Stake Voting.
Q4: Name TomoChain’s most recent product and its mainnet launching date?
TomoZ — August 20th, 2019.
Q5: The testnet of which TomoChain’s product will soon be launched?
TomoX.
SEGMENT 3 — Chat asked Long questions. 3 Rounds of questions opened up, and Long chose 5 questions from each round the answer. Below are some of the highlighted questions Long gave answers to:
Q1: Vietnam has very few successful projects, what is the problem? Does TomoChain have any plans to support other projects in Vietnam and contribute to building a stronger Vietnamese community?
Long: I consider TOMO and TomoChain being in a very good term right now, given that we have a strong and decentralized community of Masternodes and stakers securing the chain 24/24 every single day. Furthermore, good things take time to happen, even Bitcoin took a few years to create strong values. Comparatively, TomoChain would need more time to develop and mature, expanding our reputation and values to the world.
Q2: If Ethereum figures out their scaling issues, then projects like Tomo will not be able to compete. How will you respond to it?
Long: That’s no issue actually. There are other dimensions to compare that TomoChain still proves to have advantage on, such as blocktime. TomoChain has a 2 second blocktime while Ethereum’s is about 15s, which makes TomoChain more suitable for gaming and other activities that need fast interaction. Also, target audience and the community usage of the network can be very different too.
Q3: Among some technology key points such as: Sidechain, Privacy, Shardchain, how far are Tomochain going in each aspects at the moment? What are your main focus in terms of technology at the moment?
Long: Side-chain technology is doable (can be designed and built) but we focus on the mainchain at the moment. Sharding has some serious drawbacks as inter shard communication can break smart-contract composability and this is a very serious issue. The next major research area we are working on is privacy.
Q4: TomoChain has so many outstanding features in the form of TOMO WALLET, TOMO MASTER, TOMO SCAN, etc. to name a few. But, do you have real users and partners that use your services and what marketing strategies do you have to draw new users as without marketing no matter how good the product is nobody cares?
AIS-X generated its AIS token with the TRC21 standard on TomoChain. Can you elaborate more on this and its purpose?
Is the number 150 high-quality masternodes fixed or dynamic?
Long: We do have a variety of real users using our products on a daily basis. For example: TomoWallet has around 1000 daily active users, which mean around 1000 people open the app and do something every single day. The number has actually been quite stable for the last few months. Moreover, I feel that the crypto space is still very small, so TomoChain and other crypto and blockchain projects are trying our best to push the number of users. Of course the more the merrier. So my invitation to all of you to download the app and spend sometimes with TomoChain community :)
Q5: Ethereum developers seem to be loyal (or stubborn if you prefer) to Ethereum and might wait for Ethereum to scale because I haven’t seen any major ETH dapp switching to Tomochain (or other blockchain project), so how will Tomochain persuade/attract blockchain developers (solidity developers specifically) to build on Tomochain or migrate their dapps from Eth to Tomo? Assuming that the need for higher TPS in the dapps will trigger this onboarding of developers might not work necessarily and is too passive of a strategy IMO. For example, Thundercore protocol is also EVM compatible & faster (1200 TPS) than Ethereum but solidity developers are not building there either. So what’s Tomochain/Tomoteam strategy in this regard?
Long: I don’t believe in bribing or buying developers (from Ethereum or elsewhere) to build on TomoChain. It is not the way to build an authentic community. We want to build a community with real interests and determination to help grow TomoChain ecosystem. Thus, till now, we fortunately have been working with some awesome teams such as TomoSwap, PigFarm etc. Our goal is to continue to build reliable products, and increase users experience when it comes to blockchain in general, and join TomoChain specifically.
submitted by alexngn201 to Tomochain [link] [comments]

Day 6: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Refer a friend to SegWit today. There's no $10 referral offer, but you'll both get lower fees and help strengthen the BTC protocol

TL/DR
Bitcoin users can help lower transaction fees and contribute to bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
  • Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to existing wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
    Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
    Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
  • P2SH starts with "3..."
    bech32 starts with "bc1..."
Which addresses can I send from/to?
  • P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backwards compatibility
    bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
    Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
  • The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

The History, The Current State And The Future Of NavCoin

The History, The Current State And The Future Of NavCoin

This is it. If you're interested to see what NAV is all about, this is the ultimate guide for you. You will learn about the history of NavCoin and how it evolved. You will learn about the current state and features of NavCoin and you will learn about the exciting new features that are planned and coming up in the (near) future.
So buckle up, this is going to be a long ride!

Table Of Content


Introduction - What is NavCoin?


The History

Introduction
The following chapter will summarize and break down the history of NavCoin in a few sentences. NAV started a long time ago, went through rebrandings and changes of the core team before it became what it is today.

SummerCoin
NavCoin was initially first introduced under the name SummerCoin on April 23 in 2014. SummerCoin was a fork of the Bitcoin blockchain. It used to have a PoW/PoS hybrid algorithm with a block time of 45 seconds.

SummerCoinV2 /NavajoCoin
Soon after the initial launch of SummerCoin, the original developer left and SoopY (soopy452000 on bitcointalk) took over as the main developer and rebranded the project to SummerCoinV2 respectively NavajoCoin and introduced new features.
The name NavajoCoin was chosen in honor of the Navajo Code Talker. The unbreakable Navajo code was used to encrypt highly classified military information and commands and decrypt the same in WW II.
SoopY introduced a technology which allowed sending transactions anonymously and private. This technology was called "Navajo Anonymous Technology". SoopY also released a new wallet and set the Proof of Stake rewards at 10% for the first year, 5% for the second year and 2% for every year after.

NavCoin
On August 12, 2014, Craig (current lead core developer, pakage on bitcointalk) started to get involved with NAV by helping to set up a website [10].
It was officially announced that Craig joined the core team as a "Wallet & Web Developer" on November 06, 2014.
The last tokenswap and restart of the blockchain of NAV happened on May 12, 2016.
Soon later, SoopY stopped showing up and Craig stepped into the role of the lead core developer. Since then, Craig has assembled a strong team with which he built NavCoin into what it is today.
Currently, Craig and the NavCoin Core team is located in New Zealand and they are actively developing many ground-braking features which differentiate NAV from other cryptocurrencies. You will read more about that later in this article.

The Current State

Introduction
The year 2018 has been a thriving year for the NavCoin ecosystem. Despite the USD price of NAV not reflecting it, in 2018 the core team has developed a whole bunch of new features. Also the core content creators published the first official guidelines that function as an orientation guide for community content creators. This chapter will give you an overview of the current team, the features, the prior mentioned guidelines and the community of NavCoin.

Core Team [1]
Last year, the core team has grown alot. It contains of developers, content creators and interns. The core team are employees of Encrypt S, the New Zealand's leading blockchain R&D lab. Encrypt S is developing blockchain solutions since 2014 and values building open-source software highly.

Craig MacGregor - Chief Executive Officer
Craig is the CEO of Encrypt S and the founder of NavCoin. He is one of the world's most experienced blockchain developers. Craig founded NavCoin in 2014 and is developing software for it since then. He has assembled a strong team of like-minded people. Craig also speaks at seminars and conferenced. Some of the companies and conferences he did blockchain education sessions at are Oracle, Xero, Air New Zealand, Blok Tex and trademe. Together with the team, he is also doing a education series on YouTube where he explains upcoming features in-depth for the community.

Alex Vazquez - Chief Technical Officer
Alex is the CTO of Encrypt S and the most active contributor to the NavCoin core Github. He has incredible knowledge of blockchains and proposes and implements solutions for challenges and features. He supports community developers frequently and answers any questions of the community thoroughly. Like Craig, Alex is developing software for the NavCoin ecosystem for a very long time. Alex speaks at universities at times and educates students about the blockchain technology.

Paul Sanderson - Lead Software Engineer
Paul is the Lead Software Engineer at Encrypt S. He has a flair for technology. His technical and management skills are perfectly suited for consultancy and investment advising. He also frequently contributes to the NavCoin core source code.

Rowan Savage - Senior Software Engineer
Rowan is a full stack software engineer with more than a decade experience in developing complex front-end web applications. He joined Encrypt S in February 2018 and has since been involved in the Valence Plattform, the Kauri Wallet and NavCoin Core. You will read more about these feature/projects later.

Carter Xiao - Lead UX/UI Designer
Carter specializes in user-centric design and is also very talented with 3D animation, motion graphics and programming. One of NavCoins core principle is "Simplifying Crypto" and UX/UI is a very important part of that.

Matt Paul - Software Engineer
Like Rowan, Matt is a full stack Software Engineer. He joined the core team in Mai 2017 and has since worked on NavPay, NavPi, the Kauri Wallet and NavCoin Core. Kieren Hyland - Chief Strategy Officer Kieren is one of the employees that are working for Encrypt S for a very long time. He is the CSO and is a digital strategist and growth hacker with a passion for new technology and has a lot of experience in online marketing. Laura Harris - Creative Director Laura has a combination of commercial and creative flair. She manages the social media accounts for NavCoin and ensures, that NavCoins' message is always powerful, relevant and distinctive. John Darby - Content Creator John is an internationally awarded Technology and Financial sector marketing communications specialist. He is one of the Core Content Creators for NavCoin.

Features of NavCoin [2]
The following features are currently available and have been developed in the last months and years. It is sorted from newest to oldest.

Static Block Reward
The soft-fork for the enabling of static block rewards have been accepted and became active recently at 5th January 2019. This means, that the block reward was changed from a percentage based reward to a static reward. This will incentivize the stakers to have their node online 24/7 which increased the security of the network. It also aligns NavCoin with the PoSv3 specification. With this implementation, the yearly inflation will be 3.6% currently and will exponentionally decrease because of the static value of the rewards. Every staked block will now give the staker 2 NAV. Depending on how many people are staking, the yearly percentage varies. With the network weight currently being around 20'000'000 NAV, stakers earn around 10% rewards from staking 24/7.

Cold staking
To provide extra security to participants in the staking process in the NavCoin network, the core team decided to implement cold staking. This allows to store NAV offline and still be able to sign staking inputs. Looking forward, a possible integration into the Ledger Nano S would mean, that one can stake NAV securely from a offline hardware wallet. How cool is that?

OpenAlias
One of the core principle of NAV is to simplify cryptocurrencies. Many non-technical people are deterred from the long, cryptic addresses used in wallets. When sending funds, you have to make sure that every single letter and digit is correct which is nerve-wracking for the average person. NavCoin has implemented OpenAlias, which allows to transform the wallet address into a email-like form. Everyone can register a name like "[[email protected]](mailto:[email protected])". Funds can then be sent to this name, which makes sending crypto much easier and less error-prone.

Community Fund
This is the one big feature I was most excited about. NavCoin core has implemented the first fully decentralized community fund. Acceptance of proposals and release of funds is all approved by the decentralized network. No central authority has access to the fund. The community fund enables everyone to propose their ideas to the NavCoin community and to get paid to implement these ideas. Everyone can propose whatever they like (of course there is a higher rate of success if the proposal contributes to the NavCoin ecosystem ;-)). In fact, this article was sponsored by the NAV-Community by voting "yes" for my proposal. The fund works like this:
For a fee of 50 NAV, everyone can create and present his idea/proposal to the entire NavCoin network. The fee is here to help prevent spam attacks. Proposals can literally be anything - be it development, marketing or anything else you can some up with.
After creating the proposal, everyone contributing to the NavCoin network can then decide if they like the proposal of not. They vote with "Yes" or "No" for the acceptance of the proposal. Voting happens via staking. Every transaction that gets validated by you gives you one vote. This means that the more NAV you are staking, the higher your voting weight is.
The proposal stays in the state "Pending" until it is accepted or rejected. To be accepted, a proposal has to have a participation of at least 50% of all staked blocks and at least 75% of these votes have to be "Yes"-votes. Like-wise to be rejected a proposal need 50% participation of the network and 75% of these votes have to be "No"-votes. Additionally, if a proposal didn't pass after 6 voting cycles (about 6 weeks) it is also rejected.
After a proposal has been accepted, the creator of the proposal can start his work. When the work is finished, or at in the proposal defined checkpoints, the proposal creator can create a payment request for the full or part of the requested funds.
The NavCoin network can then again decide, if the work is what the creator promised to do and vote for the funds or reject the payment request because it was not what he promised. This mechanism ensures, that the funds are only release if the creator of the proposal did what he promised. The NavCoin network decides everything, there is no central authority which makes the community fund 100% decentralized.
The community fund is quite new but there have already been some proposals that were accepted like paying for the development & hosting of NAV block explorer, the creation and distribution of NAV car stickers to the community for free (or paid by the community fund), the funding of interns for NavCoin Core, translation of the website into other languages and YouTube videos. What ideas could you come up with? By the way: this article was also sponsored by the community fund :-)

Proof of Stake
Like said before, NavCoin uses the Proof of Stake algorithm to create and validate blocks. Participants of the NavCoin network can earn rewards by putting their coins to stake and thus validating blocks and securing the network. The reward used to be 4% fixed but recently changed with the implementation of PoSv3. Currently, rewards for stakers that are staking 24/7 is about 10% but it is dependent on how many people are staking. If more nodes come online, this reward will go down. If 90% of all NAVs would be at stake, stakers would still earn 4%.

Tutorials And Guidelines [3]
The NavCoin Core team pushes the community to contribute to the NavCoin ecosystem constantly. They emphasize that NavCoin is an open source project and everyone can contribute. The team tries to make it as easy as possible for the average person to contribute and thus created different tutorials and guidelines.

Tutorials To Contribute To The Website
The whole website is open source. Everyone can contribute to the website. The team created different guides for people to follow [4].

The NavCoin Developer Manifesto
The content creator core team has build a developer manifesto. It defines the values that should be uphold like for example that they will always operate in the best interest of the network. If defines the principles, purposes, scope of involvement and operational requirements [5].

The NavCoin Content Creation Manifesto
Similar to the developer manifesto, there is also a content creation manifesto. Again it defines the principles for creating content, the purpose, the scope of involvement and the operational requirements [6].

NavCoin Brand Guidelines
In addition to the content creation manifesto, there is also a brand guideline booklet. This should help content creators to create images, videos, articles etc. in the same style as the core team. It defines the NAV brand. The brand guidelines contain definitions, the language to use (words to use, words not to use), the tone of voice, what the community aspires to be and what we discourage to be. It also contains the logo pack which can be used in graphics etc. It describes correct logo spacing, logo placement, the colors of NAV and different web assets. It gives tips about gradients and overlays, the typefaces (with a font pack) and many more. Check it out yourself [7].

NavCoin Educational Series
The core team has decided to actively involve the community in the creation of new features. For this reason and to allow users to ask questions, they created the NavCoin Educational Series. The core team schedules an online live meetup which can be joined by everyone. On YouTube they do live-streams and explain upcoming features. Examples of these series are explanations for cold staking, static rewards (PoSv3) and the community fund. The community can ask questions live and the core team will answer them immediately.

Community
During the last year there have been an influx of software developers from the community starting to create features for NAV.

navexplorer.com
An examples is navexplorer.com which is programmed by community developer prodpeak and is a block explorer for NavCoin. Additionally, it functions as a interface to see what is going on in the community fund. It shows pending proposals and payment requests.

NEXT Wallet
The NEXT Wallet is an alternative wallet for NAV and other cryptocurrencies. It has a beautiful user interface and is additionally the easiest interface to interact with the community fund (create proposals, create payment requests and vote for proposals and payment requests). It is programmed by community developer sakdeniz who put hundreds of hours into it during last year.

There were also some marketing activities starting to emerge with the release of the community fund. Some of these were for example free stickers for everyone in the NAV community to stick to their car / shop / window etc. or YouTube videos of CryptoCandor and Cryptomoonie that explained the details of NAV. I am sure, that with the 500'000 NAV available in the community fund per year there will be an influx of gread ideas - development as well as marketing activities - that will be funded.

The Future

Introduction
These features are planned for the future. Many of the following features are part of the 2019 roadmap. Some will not be described in great detail because not much is known about them yet. I've still listed them as they are part of what is yet to come.

Features
Rimu - Improved Privacy Solution
NavCoin used to be a optional privacy coin. That means, that you could choose to send a transaction in private. NavCoin was criticized for the way it handles private payments because it relied on a few servers which didn't make it that decentralized. The technology was called "NavTech" and was a secondary blockchain that obscured the transaction and the amount that was sent. NavCoin Core is currently developing a new improved privacy solution that will make the private payment system completely trustless and districuted and runs at a protocol level. Alex of the NavCoin Core team has published a paper that describes this new privacy solution. It's called Zero Confidential Transactions and can be found here: https://www.researchgate.net/publication/330366788_ZeroCT_Improving_Zerocoin_with_Confidential_Transactions_and_more. What I want to highlight is the collaboration between Alex as the proposer of the solution and the Veil team, a Bitcoin Core developer and Moneros main cryptographer as reviewers. When the best work together, it will be interesting to see what the outcome is!

Valence Plattform [8]
Valence is an applied Blockchain platform that can help businesses realise the tangible benefits of blockchain. You can think of Valence as a platform with which you can build Anonymous Distributed Applications (aDapps) with. But Valence is a different kind of platform that enables developers to create new types of blockchain applications. The problem with current (turing complete) dApp platforms are their complexity and rigid nature. Security holes in smart contracts and scaling issues happen frequently [9].
Valence provides transitional pathways that let businesses migrate only part of their activities to the blockchain without having to restructure their entire business model [9].
Valence will provide a spectrum of blockchain application solutions which sit along the decentralized spectrum, offering businesses simple ways to dip their toes into the blockchain at minimal risk or complexity [9].
Thanks to the proof of stake nature of the Valence blockchain, more of a node's resources can be used for processing and routing application data which makes the platform faster and scalable.
Valence aims to make building blockchain applications as accessible to the general public as WordPress or Squarespace has made building websites.
The developers NavCoin and Valence aim to make Valence extremely easy to work with:
A Valence application could be an open source mobile or web application that submits unencrypted or encrypted data directly to the blockchain. The only configuration necessary for the app developer would be setting up the data structure. Once they've done that they can start writing to the blockchain immediately.
The Valence blockchain interface is language agnostic, meaning developers are free to build applications in whichever language they're familiar with, which greatly reduces the barrier to entry.
As the platform progresses, Valence will introduce more and more smart contract templates in collaboration with the development community. These will be like plugins that users can simply select and configure for their application, without having to reinvent the wheel and risk contract errors or spend countless hours of research to program them.

NavShopper
The following information is taken from the latest weekly news: NavShopper is a new project which will allow people to spend NavCoin on a growing list of retailers and service providers. NavShopper sits between traditional retailers accepting fiat and NavCoin users and purchases products on behalf of the user by managing the crypt-fiat conversion, payment and shipping. This project will unlock many more ways for people to spend NAV on existing websites/marketplaces without requiring each site to individually accept cryptocurrencies. Some of the prototypes we are working on include crediting your Uber account, buying products on Amazon and donating to charities.

Kauri Wallet
The Kauri Wallet aims to be an open-source, multi-currency wallet which functions as a foundation for other features.

Kauri Enhanced
Enhancements to the Kauri Wallet will allow multiple accounts, pin numbers, recurring payments and more.

Kauri DAEx
The Kauri DAEx is a Decentralised Atomic Exchange that utilises the features of the Kauri Wallet and enables users to create safe peer to peer atomic exchanges for any currency supported by the Kauri Wallet. NavDelta NavDelta will be a payment gateway that allows users to spend NAV at any business which accepts currencies supported by the Kauri Wallet. NavMorph NavMorph is a fusion of Rimu and Kauri DAEx and will allow to privately send every cryptocurrency supported by the Kauri Wallet.

Outro

If you have made it this far: Congratulations! You have learned about how NAV evolved, what its current state is and what the future will bring. To sum all up: NavCoin has made incredible progress during last year and released many long awaited features despite the bear market. Many more exciting features are yet to come and it's going to be very interesting to see where we will stand on this day next year.

Giveaway

Unfortunately, the giveaway was not possible in the cryptocurrency-subreddit because of their rules, so I'm doing it here :-) As a surprise, in the next 2 hours I am going to send some NAV to everyone who wants to try out the awesome features and NavPay you read about above.
To get your NAVs, all you have to do is the following:
If you liked the experience, I'd be happy to hear back from you :)

References

[1] https://encrypt-s.com/company/
[2] https://navcoin.org/en/roadmap/
[3] https://navhub.org/get-involved/
[4] https://navhub.org/how-to-guide/
[5] https://navhub.org/assets/NavCoinDeveloperManifesto.pdf
[6] https://navhub.org/assets/NavCoinContentManifesto.pdf
[7] https://navhub.org/assets/NavCoinBrandGuidelines.pdf
[8] https://valenceplatform.org/
[9] https://valenceplatform.org/learn/business-on-the-blockchain-made-easy/
[10] https://bitcointalk.org/index.php?topic=679791.msg8320228#msg8320228
submitted by crypto_sIF to NavCoin [link] [comments]

How to Mobile Trade with Coinbase , Binance , and Crypto Pro PayPal Getting into CRYPTO Confirmed & Fidelity Digital Assets BITCOIN Retirement Custody INS Up 47% On Binance Listing / Bitcoin Cash Network Attack Binance New Lending Coins, ETH On BitPay, Fiat To Crypto & Bitcoin ETF SEC Report BITCOIN'S BOTTOM: READY OR NOT! - BINANCE DELISTING POPULAR COINS! - FINALLY: NEW MONEY COMING IN! Cryptocurrency Dividends Bitcoin Hashrate down. Hbars on Binance.us. OMG gets listed on Coinbase. Binance has a Secret Desktop App  Site Navigation & Trade Entry Tutorial  Dec 14, 2017 Cardano(ADA) Banned from Wiki? Bitcoin to $350k? Binance to issue Debit Card

Download Bitcoin Core Latest version: 0.20.1 Download Bitcoin Core Bitcoin Core 0.20.1. Check your bandwidth and space. Bitcoin Core initial synchronization will take time and download a lot of data. You should make sure that you have enough bandwidth and storage for the full block chain size (over 350GB). If you have a good Internet connection, you can help strengthen the network by keeping ... Wenn Datenschutz Ihre Hauptsorge ist, ist das Bitcoin Core Wallet eine gute Option, da die Daten nicht von Dritten bezogen werden. Electrum . Electrum ist eine leichtgewichtige Bitcoin-Wallet für Mac, Linux und Windows. Electrum wurde im November 2011 entwickelt. Die Hauptfunktionen von Electrum sind: Support für Hardware-Wallets (wie z.B. TREZOR, Ledger Nano und KeepKey) und eine sichere ... For example, you can download and install the Bitcon.com wallet app free of charge and manage your bitcoin cash and bitcoin core holdings in one wallet. Almost 5 million Bitcoin.com wallets have ... How to vote on the Binance platform: Voting time: From 2017/12/31 10:00 AM (UTC) to 2018/01/05 10:00 AM (UTC). Each registered user can vote for multiple candidates but only a maximum of one vote per candidate. Users will need to pay 0.1 BNB per vote. At the end of the voting period, we will review the votes garnered by each candidate for final ... Download the Bitcoin Wallet by Bitcoin.com. A simple, secure way to send and receive Bitcoin. Available for iOS, Android, Mac, Windows, and Linux. Supports Bitcoin Cash (BCH) and Bitcoin (BTC). The fastest Bitcoin wallet ever created. Easily buy Bitcoin Cash (BCH) and Bitcoin (BTC) Store Bitcoin and SLP tokens in one safe place. Pay faster than ever before with InstantPay. Live price charts ... bitcoin typer 2 free download. Qt Bitcoin Trader Supported Exchanges: HitBTC, Bittrex, Binance, Bitfinex, BTC-e, Bitstamp, GOC io, Indacoin, YoBit ne Each registered user can cast multiple votes (maximum one vote per candidate coin) and needs to pay 0.1 BNB per vote. Upon completion of the voting process, Binance will list the coin on our exchange within a reasonable time frame. Depending on market response, we will try to conduct this event monthly. Binance reserves all rights to change the ...

[index] [5726] [598] [18829] [17932] [3455] [6182] [9471] [6259] [15872] [408]

How to Mobile Trade with Coinbase , Binance , and Crypto Pro

How To Pay Off Your Mortgage Fast Using Velocity Banking How To Pay Off Your Mortgage In 5-7 Years - Duration: 41:34. Think Wealthy with Mike Adams 536,389 views 41:34 This is how bitcoin's bottom is formed! Binance delisting popular coins! Fed prints $60m USD per minute! Huge bank to store crypto! ETH ALGO BAX FTM NEWS For Business Inquiries ... How To Pay Off Your Mortgage Fast Using Velocity Banking How To Pay Off Your Mortgage In 5-7 Years - Duration: 41:34. Think Wealthy with Mike Adams 514,398 views 41:34 Crypto investment firm Paradigm is now sponsoring a Bitcoin Core developer. Binance Card, a highly anticipated crypto debit card by Binance, will support four cryptocurrencies at launch. Now that you’ve bought your first litecoins from coinbase you want to learn how to buy other coins them! Enter Binance! You can support my channel by using the links below. Thank You :) Trade ... Cryptocurrency Dividends - Six cryptos that pay dividends and why you should consider cryptocurrency dividends for passive income. NEO: https://neo.org/ Bina... Use the links below to begin mobile Crypto & Stock trading directly from your IOS or Android device. 1) Coinbase (You get rewarded 10$ in free bitcoin for signing up through this link ) https ... You can spam the Bitcoin Core chain but you won’t get your transactions confirmed unless you pay several dollars per transaction. That’s a negative for the average user but a positive in that ... Off The Chain #238: PlanB on Why Bitcoin’s Stock-To-Flow Model Is Becoming More Accurate Over Time - Duration: 1:05:59. Anthony Pompliano 41,748 views 1:05:59

http://binary-option-trade-arabic-trade-brocker.liteforex.club